|
||
6
4 Functions in Carcinoma Cell
Migration on Laminin-1 by Mediating the Formation and
Stabilization of Actin-containing Motility Structures
Department of Medicine (GI Division), Beth Israel Deaconess Medical Center and Harvard Medical School, Boston, Massachusetts 02215
Functional studies on the
6
4 integrin have
focused primarily on its role in the organization of
hemidesmosomes, stable adhesive structures that associate with the intermediate filament cytoskeleton. In
this study, we examined the function of the
6
4 integrin in clone A cells, a colon carcinoma cell line that expresses
6
4 but no
6
1 integrin and exhibits dynamic
adhesion and motility on laminin-1. Time-lapse
videomicroscopy of clone A cells on laminin-1 revealed
that their migration is characterized by filopodial extension and stabilization followed by lamellae that extend in the direction of stabilized filopodia. A function-blocking mAb specific for the
6
4 integrin inhibited
clone A migration on laminin-1. This mAb also inhibited filopodial formation and stabilization and lamella
formation. Indirect immunofluorescence microscopy
revealed that the
6
4 integrin is localized as discrete
clusters in filopodia, lamellae, and retraction fibers. Although
1 integrins were also localized in the same
structures, a spatial separation of these two integrin
populations was evident. In filopodia and lamellae, a
striking colocalization of the
6
4 integrin and F-actin
was seen. An association between
6
4 and F-actin is
supported by the fact that
6
4 integrin and actin were
released from clone A cells by treatment with the F-actin-
severing protein gelsolin and that
6
4 immunostaining at the marginal edges of clone A cells on laminin-1
was resistant to solubilization with Triton X-100. Cytokeratins were not observed in filopodia and lamellipodia. Moreover,
6
4 was extracted from these marginal edges with a Tween-40/deoxycholate buffer that
solubilizes the actin cytoskeleton but not cytokeratins.
Three other carcinoma cell lines (MIP-101, CCL-228,
and MDA-MB-231) exhibited
6
4 colocalized with
actin in filopodia and lamellae. Formation of lamellae
in these cells was inhibited with an
6-specific antibody.
Together, these results indicate that the
6
4 integrin
functions in carcinoma migration on laminin-1 through
its ability to promote the formation and stabilization of
actin-containing motility structures.
THE integrin Although the In this study, we investigated the function and cytoskeletal associations of Cells and Antibodies
The clone A cell line was originally isolated from a human, poorly differentiated colon adenocarcinoma (10), and its in vitro properties and repertoire of integrin receptors have been described previously (8, 32, 34, 54).
The CCL-228 colon carcinoma and the MDA-MB-231 breast carcinoma
cell lines were obtained from American Type Culture Collection (Rockville, MD). The MIP-101 colon carcinoma cell line has been described previously (8). Cells were grown in RPMI 1640 medium containing 10 mM Hepes, penicillin (50 U/µl), streptomycin (50 µg/ml), and 10% FBS.
The following mAbs were used in this study: mouse mAb 2B7 (integrin
Cell Migration Assays
To assay the migration of clone A cells, bacteriological dishes were coated
with 10-100 µg of laminin-1 prepared from the EHS sarcoma as described
(27) or collagen type I (Collaborative Research, Waltham, MA) for 2 h at
room temperature and then blocked with PBS containing 1% BSA for 1 h.
Clone A cells in exponential growth were removed from culture dishes
and resuspended in serum-free RPMI 1640 medium containing 10 mM
Hepes and 0.1% BSA. The cells were then plated at low density (1 × 104/
cm2) on the matrix-coated dishes and allowed to adhere for 30 min in a humidified atmosphere with 5% CO2 at 37°C. In some experiments, integrin-specific antibodies (2B7 or MC-13, 10 µg/ml) or a nonspecific mouse IgG
control (10 µg/ml) were added to the cells either before the cells were
plated or after the cells had adhered for the 30 min. The dishes were then
sealed with parafilm and placed on a microscope stage heated to 37°C. For
image analysis, an inverted microscope (model Diaphot 300; Nikon, Inc.,
Melville, NY) with phase contrast optics was used. This microscope was
connected to a CCD camera (Dage-MTI, Michigan City, IN), a frame-grabber (Scion, Frederick, MD), and a 7600 Power Macintosh computer
(Cupertino, CA) to capture the images. Images were collected for 1 h and
analyzed with IPlab Spectrum image analysis software.
Migration speed was determined by following cell centroid displacements as a function of time for 1 h at intervals of 15 min. For each individual experiment, 30-40 cells were analyzed. A frame-by-frame analysis of
filopodia at intervals of 1 min for 1 h was used to differentiate filopodia
from retraction fibers and to monitor the formation and stabilization of
filopodia. Lamellar area was determined by tracing their contour and
quantifying the area digitally.
Indirect Immunofluorescence Microscopy
Clone A cells were plated on matrix-coated dishes as described above and
incubated for 1 h in a humidified atmosphere with 5% CO2 at 37°C. The
cells were then fixed for 20 min at room temperature with a buffer containing 4% paraformaldehyde, 100 mM KCl, 300 mM sucrose, 2 mM
EGTA , 2 mM MgCl2, and 10 mM Pipes at pH 6.8. Based on a previously
described extraction protocol (4, 13), the cells in some experiments were
extracted for 1 min at 4°C before fixation with either a "membrane"
buffer containing 0.5% Triton X-100, 100 mM KCl, 300 mM sucrose, 10 mM EGTA, 2 mM MgCl2, 1 mM PMSF, and 10 mM Pipes at pH 6.8 or for
5 min at room temperature with a "cytoskeletal" buffer containing 1%
Tween-40, 0.5% sodium deoxycholate, 10 mM NaCl, 2 mM MgCl2, 1 mM
PMSF, and 20 mM Tris-HCl, pH 7.4, and then fixed for 20 min in the
paraformaldehyde buffer. Subsequently, the fixed cells were rinsed with
PBS and incubated with a blocking solution that contained 1% albumin
and 5% donkey serum in PBS for 30 min. Primary antibodies (GoH3, 1:50;
K20, 1:50; pan-cytokeratin, 1:200) and/or FITC phalloidin (20 µg/ml) in
blocking solution were immunoreacted separately or in combination with
the cells for 30 min. The cells were rinsed three times and either a fluorescein-conjugated donkey anti-mouse or a rhodamine-conjugated donkey
anti-rat IgG (Jackson ImmunoResearch Labs, West Grove, PA) in blocking buffer (1:150) were used separately or in combination to stain the cells
for 30 min. Cells were rinsed with PBS and mounted in a mixture (9:1) of
glycerol and PBS, pH 8.5, containing 0.1% propylgallate. The dishes were
cut into slides and examined by confocal microscopy (model LSM; Carl
Zeiss, Inc., Thornwood, NY).
Actin-severing Experiments
Clone A cells (2 × 106) suspended in RPMI-H with 0.1% albumin were
plated on laminin-1-coated dishes and incubated for 1 h at 37°C. The following steps were done at 4°C. The medium was removed and a membrane buffer (see above) was added for 30 s and removed by aspiration. A
"low calcium" buffer (25 µm CaCl2, 100 mM KCl, 300 mM sucrose, 10 mM EGTA, 2 mM MgCl2 , leupeptin [10 µg/ml], aprotinin [1 µg/ml], pepstatin [5 µg/ml], and 10 mM Pipes, pH 6.8) was used to remove the membrane buffer by washing the cells four times with gentle rocking. Subsequently, the low calcium buffer containing 200 nM gelsolin (kindly
provided by Dr. Paul Janmey, Harvard Medical School, Boston, MA) and
50 µg/ml of GC-globulin (Calbiochem, La Jolla, CA) was added to the
cells and incubated for 30 min. Control cells were treated with the low calcium buffer alone. An equal volume of membrane buffer was added to the
cells for 30 s to terminate the reaction. The buffer was removed and collected in microfuge tubes, centrifuged at 12,000 rpm for 10 min, and immunoprecipitated with the 2B7 antibody. The immune complexes were resolved by SDS-PAGE and immunoblotted with an anti- The Integrin Clone A cells were chosen to investigate the possible function of the The migration of clone A cells was examined by time-lapse videomicroscopy in serum-free conditions. Clone A
cells exhibit random migration (mean rate = 25 µM/h)
when plated on laminin-1. As shown in Fig. 1, this rate of
migration on laminin-1 is approximately threefold greater
than on an equivalent concentration of collagen type I,
even though these cells adhere equally well to both matrices (34). Varying the concentration of collagen type I in
these assays did not induce migration, suggesting a specific
role for laminin in stimulating clone A migration (data not
shown).
The
Photomicrographs of clone A cells on laminin-1 demonstrate the morphological changes induced by inhibiting the
The Integrin We analyzed the sequence of events by which filopodia
and lamellae lead to cell translation on laminin-1 using
time-lapse videomicroscopy to understand how the
The extension of a lamella occurred frequently after the
stabilization of a filopodium (Fig. 3, A-C). Such lamellae
extruded from the roots of stabilized filopodia and followed the direction of these filopodia (Fig. 3, A-C). Subsequently, the cell bodies translocated in the direction of
well-developed lamellae, as described previously (2).
Thus, the stabilization of filopodia appeared to be a major
determinant of the direction of cell migration. The time
that clone A cells moved in a specific direction on laminin-1 was relatively brief (<1 h) because of more active lamellae
at other sites on the cell and the collapse of the initial
lamellae. This frequent change in direction gave the appearance of a random walk.
We studied the influence of the
The Integrin To gain insight into how the The
The
Because Association of Our observations that the Visualization of clone A cells that had been stained with
the GoH3 mAb and phalloidin revealed a striking colocalization of the
To study the interaction of the
The presence of Biochemical Evidence for an Association of the The data presented above strongly support an association
of the
Functional Association of the We explored the possibility that the functional and topographical properties of the
We also explored the function of the Functional studies on the The premise for this study was our interest in understanding how the The videomicroscopy data presented indicate that filopodial formation and stabilization play a key role in the
migration of clone A cells on laminin-1, reminiscent of
earlier studies on cell locomotion by Albrecht-Buehler
that ascribed exploratory and sensory capabilities to filopodia (2). Using fibroblasts plated on surfaces coated with
gold, he observed that lamellipodia form when filopodia
find and contact a gold-coated area and that these lamellipodia follow the direction of the stabilized filopodia. The
importance of filopodial contacts in directing cell migration is underscored by the pioneer growth cone model in
grasshoppers where a single filopodial contact can re-orient
an entire growth cone (41). This sequence of events is consistent with the more recent transport-track model of migration (39). This model implies that stabilized filopodia
or any other polarized, actin filament bundle fixed onto a
substrate provides the cell with a structure that can be
used as a one-way transport track by myosin II motors. Such motors pull other cytoplasmic components bound to
substratum-free actin filaments forward (39). This model
has also been supported by the respreading of cells after
mitosis. Such cells use retraction fibers to guide the
spreading edge, and these retraction fibers contain polarized bundles of actin filaments anchored to the substrate at their tips. If the retraction fibers are mechanically detached from the substrate, a spreading edge is not extended (7, 38). These observations are mentioned because
we observed a related sequence of events during the migration of clone A cells on laminin-1. The nascent lamellae
formed in the direction of filopodia that had stabilized on
laminin-1. Moreover, this stabilization is mediated by the
One question that arises from our data is whether the
role of the The data provided here suggest an association of the
The association of the The An interesting aspect of this study is the apparent division of labor between the The cytoskeletal associations of the
6
4, a receptor for the laminins, is essential for the organization and maintenance of epithelial structure (11, 57). In many epithelia, this integrin mediates the formation of stable adhesive structures
termed hemidesmosomes that link the intermediate filament cytoskeleton with the extracellular matrix (3, 16). Indeed, the ability of
6
4 to associate with intermediate filaments distinguishes it from other integrins that interact
primarily with the actin cytoskeleton (21). The importance
of this integrin in epithelial structure has been reinforced by the recent generation of
4-knockout mice that exhibit
gross alterations in epithelial morphology and loss of anchorage to the basement membrane (11, 57).
6
4 integrin is also expressed in many
carcinomas, its biological functions in these epithelial-
derived tumors have not been well studied (43). We and
others have argued that
6
4 may be associated with the
process of carcinoma invasion (6, 12, 26, 43, 45). Initially,
this argument was based on immunohistochemical data
that correlated
6
4 expression and localization with invasive carcinoma (12, 45, 56). More recently, we demonstrated that ectopic expression of
6
4 in
4-deficient colon carcinoma cells significantly increased the rate at
which these cells invaded laminin matrices (6). Such data
that associate
6
4 with carcinoma invasion, however, are
not consistent with the established role for this integrin in
the formation of stable and rigid adhesive structures and
maintenance of cell polarity in normal epithelial cells because invasive carcinoma cells are characterized by their
dynamic interactions with extracellular matrices and their
rapid rate of migration, as well as a loss of polarity (24). A
priori, these dynamic functions of carcinoma cells would
be impeded by the presence of
6
4-containing hemidesmosomes. In fact, hemidesmosomes are not commonly observed in invasive carcinoma cells, although
6
4 expression often persists (for review see reference 43). The
hypothesis can be derived from these observations that
6
4 is associated with different functions in invasive carcinoma cells than in normal epithelial cells. Moreover, this
functional difference may derive from the interaction of
6
4 in carcinoma cells with cytoskeletal proteins and
other molecules that do not interact with this integrin in
normal cells.
6
4 in invasive colon carcinoma cells
that migrate on laminin-1 matrices. The data obtained implicate
6
4 in cell migration, and they demonstrate that
this integrin is localized in cell structures associated with
motility, namely filopodia and lamellae. Importantly, we
also show that
6
4 associates with the actin cytoskeleton
in filopodia and lamellae and that it participates in their
formation and stabilization.
Materials and Methods
6) prepared in our laboratory (46); rat mAb GoH3 (integrin
6) from
Immunotech (Westbrook, ME); mouse mAb K20 (integrin
1); mouse
mAb MC-13 (integrin
1) provided by Steven Akiyama (National Institutes of Health, Bethesda MD) (1); mouse mAb A9 (integrin
4) provided by Thomas Carey (University of Michigan, Ann Arbor, MI); mouse
anti-pan-cytokeratin (a mixture of antibodies that recognizes cytokeratins
1, 4, 5, 6, 8, 10, 13, and 19) from Sigma Chemical Co. (St. Louis, MO).
4 integrin
polyclonal antibody elicited against the last 20 amino acids of the
4 cytoplasmic tail.
Results
6
4 Functions in the Migration of Clone
A Cells on Laminin-1 Matrices
6
4 integrin in the migration of carcinoma
cells for several reasons. These cells, which were derived
from a poorly differentiated colon carcinoma, are invasive
both in vitro (8) and in vivo (53). They adhere avidly to
laminin-1 (34) and, in fact, can mediate dynamic adhesion
on laminin-1 under laminar flow conditions (54). Clone A
cells are also advantageous because they express the
6
4
but not the
6
1 integrin laminin receptor (32, 34), enabling the study of the
6
4 integrin in the absence of
6
1 function and the use of
6-specific reagents to target the
6
4 integrin specifically. Clone A cells also employ a
1 integrin (
2
1) as a laminin-1 receptor and for this reason are useful for studying functional differences between
1 and
4 integrin laminin receptors (32, 34).
Fig. 1.
Random migration
of clone A cells on laminin-1
is dependent on the integrin
6
4. Clone A cells were
plated on laminin-1 or collagen I-coated dishes (10 µg/
ml) and incubated at 37°C for 30 min before the addition of
either a control mouse IgG
(10 µg/ml) or the
6 integrin-specific mAb 2B7 (10 µg/ml). Migration was analyzed by time-lapse videomicroscopy as described in the
Materials and Methods section. The mean cell speed
(i.e., displacement of the cell centroid as a function of time) obtained from the analysis of 30-40 cells for each experimental condition is reported in this bar graph. Error bars represent SEM.
[View Larger Version of this Image (35K GIF file)]
6
4 integrin functions in migration on laminin-1
based on the finding that treatment of clone A cells with
an
6-specific mAb (2B7) (46) inhibited this migration significantly (66%) (Fig. 1), but it did not detach the cells
from laminin-1 (Fig. 2). In contrast, the cells "rounded up"
and detached after exposure to mAb 13, a
1-specific
mAb (1) (data not shown). These mAb inhibition data
suggest different functions for the
6
4 integrin and
1 integrins in mediating the dynamic interactions of clone A
cells with laminin-1.
Fig. 2.
The motile morphology of clone A cells on
laminin-1 is dependent on
the integrin
6
4. Cells were
plated on either laminin- 1-coated (A and C) or collagen I-coated (D) dishes
and incubated at 37°C for 30 min before the addition of either (A) control mouse IgG
(10 µg/ml) or (C) 2B7 mAb
(10 µg/ml). After 30 min, the
cells were photographed using phase contrast optics.
Note the presence of prominent fan-shaped lamellae in
cells on laminin-1 (A) and their digitally traced area in
B. The
6-specific mAb 2B7
inhibits formation of these
lamellae (C). Prominent
lamellae are not seen when
clone A cells are plated on collagen I (D). Bar, 20 µm.
[View Larger Version of this Image (83K GIF file)]
6
4 integrin. Clone A cells exhibited a fan-shaped appearance on laminin-1 with prominent lamellae and numerous filopodia (Fig. 2, A and B). Treatment of these
cells with 2B7 antibody either before or after plating on
laminin-1 had a modest effect on inhibiting cell spreading, but it markedly inhibited the formation of lamellae (Fig. 2
C). In contrast to laminin-1, clone A cells plated on collagen type I were well spread but did not exhibit prominent lamellae (Fig. 2 D).
6
4 Participates in the Dynamic
Formation of Actin-based Motility Structures: Filopodia
and Lamellae
6
4
integrin contributes to migration. Subsequent to attachment and spreading on laminin-1, numerous filopodia protruded from clone A cells, as evidenced by the sequence of
three cells shown in Fig. 3. Only characteristic threadlike
structures that actively protruded from the cells were considered to be filopodia. At later times, filopodia also protruded from the lamellae that had formed in these cells.
Video analysis revealed that nascent filopodia exhibited a
wide range of motion until they either retracted or were
stabilized by anchoring to the laminin-1 substratum. Stabilization was detected when the filopodia anchored to laminin-1 at one or more points along their length, a process
that restricted their movement and prevented their retraction. When stabilization occurred at a point proximal to
the tip of the filopodium, the filopodium usually continued to extend or move freely distal to the attachment point
forming a conspicuous angle, the vertex being the anchoring point (Fig. 3, A-C). The formation of such angles was
observed in 80% of the stabilized filopodia examined.
Fig. 3.
Dynamics of filopodia and lamellae in clone A cells on
laminin-1. Cells plated on laminin-1 were analyzed by time-lapse
videomicroscopy. Each column shown (A-C) represents a sequence of frames recorded at the specified times from different
cells migrating on laminin-1. Arrowheads indicate points at which
the filopodia stabilize on the laminin-1 matrix. Asterisks denote
the protruding lamella. In A, the filopodium shown stabilized at 2 min and formed an angle at the point indicated by the arrowhead.
Note that only the anchoring point is attached because both proximal and distal segments shift positions at later times, during
which the lamella extended following the direction of the filopodium. In B and C, the filopodia shown stabilized at 4 and 2 min,
respectively. In contrast to the filopodium shown in A, the entire
segment of these filopodia proximal to the vertex of the angle became immobilized and the lamellae extended in the direction of
these stabilized filopodia. Bar, 5 µm.
[View Larger Version of this Image (104K GIF file)]
6
4 integrin on clone
A cells by inhibiting the action of this integrin with the
2B7 mAb and assessing the qualitative and quantitative effects of this inhibition on lamellar dynamics. The formation of lamellae was markedly inhibited (80%) within 60 min of adding the 2B7 mAb to motile cells (Fig. 4). However, the cells inhibited with 2B7 remained well spread
(Fig. 2), suggesting a specific function for the
6
4 integrin in the formation of lamellae and not in cell attachment or spreading. Similarly, quantification of higher
magnification video images revealed that 2B7 inhibited
filopodial formation significantly and that the filopodia
that did form in the presence of this inhibitory antibody
stabilized much less frequently. Specifically, 48% of filopodia stabilized in control cells compared with 3% in 2B7-treated cells (Fig. 5). In contrast to these effects of 2B7 on
clone A cells, the addition of mAb 13, a
1 integrin-specific mAb, caused the cells to round-up and subsequently
detach as mentioned above.
Fig. 4.
Formation of lamellae in clone A cells on laminin-1 requires the
6
4 integrin. Clone A cells were
plated on laminin-1-coated dishes and incubated for 30 min at 37°C before the addition of 2B7 (10 µg/ml) or a
control IgG. The cells were
photographed after 1 h, and
their lamellar area (µm2/cell)
was determined by digital
image analysis (see example in Fig. 2 B). 50 cells were analyzed
for each condition. Error bar represents SEM.
[View Larger Version of this Image (31K GIF file)]
Fig. 5.
Inhibition of the integrin
6
4 reduces the formation
and stabilization of filopodia in clone A cells on laminin-1. Clone A cells were plated on laminin-1-coated dishes and incubated for 30 min at 37°C before the addition of either 2B7 (10 µg/ml) or a
control IgG (10 µg/ml) and analysis by time-lapse videomicroscopy. For each condition, five cells were monitored for 1 h at a
frequency of one frame per minute and each frame was analyzed
for the active formation of filopodia. A filopodium was considered stabilized if it remained immobile for several frames. The
data shown represent the number of filopodia that either formed
or stabilized/cell/hour. Error bar represents SEM.
[View Larger Version of this Image (32K GIF file)]
6
4 Is Localized in Filopodia and
Lamellae in Areas Distinct from
1 Integrins
6
4 integrin influences the
formation of filopodia and lamellae, we analyzed the spatial distribution of this integrin by indirect immunofluorescence microscopy using GoH3, an
6-specific mAb (48).
Identical immunostaining results were obtained with A9, a
4-specific mAb (data not shown).
6
4 integrin was distributed throughout the cell
body, as well as in the lamellae and filopodia of clone A
cells plated on laminin-1. In the lamellae, it exhibited a
fine grainy pattern of staining (Fig. 6, A and B). In the
filopodia themselves,
6
4 staining was localized in discrete clusters that were distributed throughout the shaft
(Fig. 6 B). At points of filopodial angling, a concentration
of
6
4 staining was usually observed (Figs. 6 B and 7, C
and D). In contrast to cells plated on laminin-1, clone A
cells plated on collagen type I displayed a diffuse distribution of
6
4 staining with few cluster formations evident
on the ventral surface of the cells (Fig. 6 C).
Fig. 6.
The integrin
6
4 is localized in lamellae and filopodia
in clone A cells on laminin-1. Cells plated on laminin-1 (A, B, and D) or collagen I (C) were fixed and processed for immunofluorescence using the rat GoH3 (anti-
6) mAb followed by a
rhodamine-conjugated anti-rat antibody as described in the Materials and Methods section. The confocal images shown represent optical sections of the ventral surface. (A) Note the presence
of
6
4 staining on the lamellae and in the filopodia at the leading edge (right side of the cell), as well as in retraction fibers at
the trailing edge (left side of cell). (B) A higher magnification
demonstrates the clustered appearance of
6
4 integrin in the
filopodia and its presence at points of filopodial angling. (D) Fibers that are positive for
6
4 staining (arrowheads) are apparently left behind by the advancing cell on the left. (C) Clone A
cells plated on collagen I exhibit only a diffuse pattern of
6
4
staining on their ventral surface. Bars, 10 µm.
[View Larger Version of this Image (112K GIF file)]
Fig. 7.
Distinct localization
of
6
4 and
1 integrins in
the filopodia and lamellae of
clone A cells on laminin-1.
Clone A cells were plated on
laminin-1 for 1 h at 37°C and
processed for double immunofluorescence as described
using rat GoH3 mAb and
the mouse K-20 mAb followed by a combination of a
TRITC-conjugated anti-rat antibody and an FITC-conjugated anti-mouse antibody
that do not cross-react. The
ventral surface of the cells
was analyzed by confocal microscopy. Red, GoH3 mAb;
green, K-20 mAb; yellow,
colocalization. (A) Several
filopodia and retraction fibers show a segregated distribution of
6
4 and
1 staining. (B) In lamellae,
6
4
staining is largely segregated
from
1 staining except in
the streak-shaped areas where
filopodia project into the
lamella. (C and D) Higher magnification images of filopodia showing the spatial segregation of
6
4 and
1 staining and the presence of
6
4
in the angles of filopodia (arrowheads). Bar, 5 µm.
[View Larger Version of this Image (62K GIF file)]
6
4 integrin was expressed intensely in characteristic retraction fibers of clone A cells on laminin-1 (Figs. 6
A and 8 A). Retraction fibers were identified by their
unique appearance at the trailing edges of fan-shaped cells
(Fig. 2). In these fan-shaped cells, there was a clear gradient of
6
4 towards the rear that peaked in intensity in retraction fibers (Fig. 6 A). In addition, some retraction fibers that were enriched in
6
4 expression were observed
detached from cells, most likely remnants of migrating cells (Fig. 6 D).
Fig. 8.
Enhanced localization of the
6
4 integrin in retraction
fibers of clone A cells on laminin-1. Cells plated on laminin-1 for 1 h at 37°C were processed for double immunofluorescence as described using the rat GoH3 mAb and mouse K-20 mAb followed
by a combination of a TRITC-conjugated anti-rat antibody and
an FITC-conjugated anti-mouse antibody that do not cross-react.
The ventral surface of the cells was analyzed by confocal microscopy. (A) GoH3 mAb. (B) K-20 mAb. Note the presence of
6
4
staining in retraction fibers (A, arrowheads) at the trailing edge
of the cells. Staining of
1 integrin is absent in these fibers (B).
Bar, 10 µm.
[View Larger Version of this Image (57K GIF file)]
1 integrin function is also critical in the interaction of clone A cells with laminin-1 (32, 34, 54), we compared the distribution of
1 integrin with that of the
6
4
integrin by double immunostaining using GoH3 and a
1-specific mAb, K20. Although
1 integrin was also localized in filopodia and lamellae, a striking difference in the
localization of
4 and
1 integrin staining was evident in
these structures (Fig. 7, A-D). In filopodia, discrete clusters or patches of
1 and
6
4 integrin staining were apparent. As noted above,
6
4 staining was observed frequently at points of filopodial angling (Fig. 7, C and D).
There were also some regions of overlapping staining,
most consistently at the tips of filopodia (Fig. 7, C and D).
The staining pattern of the
6
4 and
1 integrins was segregated in the lamellae as well, except at those points
where the root of a filopodium projected into the lamella
(Fig. 7 B). In the characteristic retraction fibers of clone A
cells on laminin-1, the double immunostaining revealed
that
6
4 expression predominated over
1 integrin expression (Fig. 8, A and B).
6
4 with the Actin Cytoskeleton in
Motile Structures
6
4 integrin functions in cell
migration and that it is localized in actin-containing structures such as filopodia and lamellae suggest that it does interact with the actin cytoskeleton in clone A cells. However, the majority of studies on the
6
4 integrin and the
cytoskeleton have focused on its association with intermediate filaments, especially in hemidesmosomes (5, 11, 15,
22, 49, 51). Very little is known, in fact, about possible interactions of
6
4 with the actin cytoskeleton. For this
reason, we assessed the association of the
6
4 integrin
with both the actin cytoskeleton and cytokeratins in clone
A cells plated on laminin-1 by indirect immunofluorescence microscopy using the GoH3 mAb and either phalloidin or a pan-cytokeratin antibody.
6
4 integrin and F-actin in filopodia and at
the edges of the lamellae (Fig. 9, A-D). In contrast, cytokeratins were excluded from filopodia and the edges of
lamellae in clone A cells plated on laminin-1 based on the
staining pattern observed with the pan-cytokeratin antibody (Fig. 10 A). Cytokeratin staining was concentrated
largely in the cell body and proximal portions of lamellae.
Costaining with GoH3 did not indicate any significant association of the
6
4 integrin and cytokeratins in filopodia
or at the edges of lamellae (Fig. 10 A).
Fig. 9.
6
4 integrin colocalizes with F-actin in filopodia of
clone A cells on laminin-1. Cells plated on either laminin-1 (A-D
and F) or collagen I (E) at 37°C for 1 h were processed for double immunofluorescence as described using the rat GoH3 mAb followed by a rhodamine-conjugated anti-rat antibody and FITC-conjugated phalloidin. The confocal images shown represent optical sections of the ventral surface of the cells. (A and C) GoH3.
(B, D, E, and F) Phalloidin. A and B demonstrate colocalization
of
6
4 and F-actin in a group of filopodia. D shows the formation of actin cables on the top lamella that project into filopodia.
These filopodia are enriched in
6
4 (C). E shows the presence
of polygonal actin cables in clone A cells plated on collagen I. In
F, the cells were incubated with 2B7 antibody for 30 min before
fixation. Note the disappearance of actin cables (remaining protrusions are presumably retraction fibers, see text). Bars, 10 µm.
[View Larger Version of this Image (95K GIF file)]
Fig. 10.
The integrin
6
4
localized at the marginal areas of clone A cells on laminin-1 does not colocalize
with cytokeratins. Cells were
plated on laminin and incubated for 1 h at 37°C . In A, the cells were fixed immediately after the incubation period in paraformaldehyde and then permeabilized
with Triton X-100. In B, cells were extracted first with a Triton X-100 buffer before fixation. In C, the cells were extracted with a Tween-40/deoxycholate buffer
before fixation. After fixation, the cells in A-C were stained by a double immunofluorescence protocol using rat GoH3 mAb and a mouse pan-cytokeratin mAb antibody followed by a combination of a TRITC-conjugated anti-rat antibody and a
FITC-conjugated anti-mouse antibody that do not cross-react. The ventral surface of the cells was analyzed by confocal microscopy. Red, GoH3; green, cytokeratin; yellow, colocalization. In A and B, the marginal areas (edges of lamellae,
filopodia, and retraction fibers) exhibit positive
6
4 staining but no cytokeratin
staining. Note in B the persistence of
6
4 staining in marginal clusters arranged
in streaks that are likely portions of filopodia. In C, the Tween-40/deoxycholate
buffer extracted most of the
6
4 staining in filopodia and lamellae. However,
6
4 staining persisted at the base of lamellae where it colocalized with cytokeratins. The cytokeratin staining was digitally "overexposed" to detect any possible
cytokeratin expression. Bar, 10 µm.
[View Larger Versions of these Images (34 + 41K GIF file)]
6
4 integrin with the
cytoskeleton in more detail, we used an in situ extraction
scheme that solubilizes proteins to an extent that correlates with their cytoskeletal associations (4, 13). Clone A
cells adherent to laminin-1 were extracted with either a
0.5% Triton X-100 buffer that removes most of the soluble
protein and phospholipid but not the actin and intermediate filament cytoskeletons, or a two-detergent buffer (1.0% Tween-40/0.5% deoxycholate) that removes the
bulk of the actin cytoskeleton but not intermediate filaments and associated proteins (4, 13). Subsequent to extraction, the cells were fixed and costained with integrin-specific mAbs (GoH3 or K20) and cytoskeletal-specific
reagents (phalloidin or pan-cytokeratin mAbs). Extraction
of clone A cells with the Triton X-100 buffer revealed that
the
6
4 and F-actin colocalization observed in unextracted cells is preserved in clusters at proximal sites in filopodia, as well as at the roots of filopodia that project
into the lamellae (Fig. 11, A and B). Several of these colocalization sites were also the origins of actin filament bundles (Fig. 11, A and B). In contrast,
6
4 did not colocalize
with cytokeratins in filopodia and distal sites of many of
the lamellae either in unextracted cells (Fig. 10 A) or after
the Triton X-100 buffer extraction (Fig. 10 B). These results suggest that
6
4 is retained at the cell edges because
of its association with actin and not with cytokeratins. In
agreement with this possibility, these marginal areas of actin-associated
6
4 integrin were removed by the Tween/ deoxycholate buffer. As shown in Fig. 10 C, the only
GoH3-positive staining that remained after this buffer was
the staining that colocalized with cytokeratins at the base
of lamellae, the lamellae themselves having been largely
removed by the Tween/deoxycholate buffer. F-actin was
extracted by the Tween/deoxycholate buffer, as indicated
by a lack of phalloidin staining (Fig. 11 D). Interestingly, most of the
1 integrin staining was removed from cells on
laminin-1 by the Triton X-100 buffer, suggesting a weaker
interaction of
1 integrins with the cytoskeleton than with
the
6
4 integrin in these cells (Fig. 11 C). Also, most of
the
6
4 staining was extracted by the Triton X-100 buffer
in cells plated on collagen I, indicating that the association
of
6
4 with actin is dependent on laminin-1 (data not
shown). Together, these results reinforce the hypothesis
that the retention of
6
4 in filopodia and edges of lamellae of clone A cells on laminin-1 is mediated by the actin cytoskeleton. In these motile structures, the only apparent
association of
6
4 with cytokeratins occurs at the base of
the lamellae.
Fig. 11.
The integrin
6
4 is associated with F-actin. Cells
were plated on laminin and incubated for 1 h at 37°C . In A-C,
the cells were extracted first with a Triton X-100 buffer before
fixation with paraformaldehyde. In D, the cells were extracted
with a Tween-40/deoxycholate buffer before fixation. After fixation, the cells in A and B were double immunostained using rat
GoH3 mAb followed by a rhodamine-conjugated anti-rat antibody (A) and FITC-conjugated phalloidin (B). In C, the cells
were stained with mouse K-20 mAb antibody followed by an
FITC-conjugated anti-mouse antibody. In D, the cells were
stained with phalloidin. The ventral area of the cells was analyzed
by confocal microscopy. Note in A and B the colocalization of
6
4 (A) and F-actin (B) at the roots of filopodia (arrowheads).
Several of these colocalization areas are in continuity with actin
cables (B). Bar, 10 µm.
[View Larger Version of this Image (72K GIF file)]
6
4 at the origin sites of actin filament
bundles described above prompted us to examine the possibility of a functional relationship. The actin bundles were
usually organized as multiple cables that ran parallel to the
margins of lamellae and were most commonly observed in
fan-shaped cells (Fig. 9 D). The
6
4 integrin colocalized
with F-actin at the termini of several of these parallel actin
bundles, which were in continuity with filopodia, but it was
not localized along the bundles themselves (Fig. 9, C and
D; Fig. 11). These actin bundles were not organized into
polygonal arrays traversing the nuclear area, such as those that are characteristic of fibroblasts. Interestingly, however, clone A cells on collagen type I did exhibit such a polygonal array of filament bundles (Fig. 9 E). The parallel
actin bundles were no longer evident when cells plated on
laminin-1 were treated with the 2B7 antibody, suggesting
that the
6
4 integrin is critical for their formation (Fig. 9 F).
6
4
Integrin with Actin Filaments
6
4 integrin with actin filaments in clone A cells.
To obtain biochemical evidence for this association, we
used the actin-severing protein gelsolin to assess whether
severing actin filaments would liberate
6
4. Clone A
cells adherent to laminin-1 were extracted with the 0.5%
Triton X-100 buffer to remove soluble proteins and then
treated with gelsolin. The proteins liberated from extracted cells treated with gelsolin, as well as from extracted
cells treated with the buffer alone, were analyzed for the
presence of
6
4 by immunoprecipitation with 2B7 and
subsequent immunoblotting with a polyclonal antibody
specific for the
4 cytoplasmic domain. As shown in Fig.
12, the 200-kD
4 subunit was liberated from gelsolin-treated cells but not from cells treated with buffer alone.
Moreover, the material obtained from the gelsolin-treated
cells but not the control cells was enriched in actin (Fig. 12).
Fig. 12.
The actin-severing
protein gelsolin releases
6
4
integrin from permeabilized
clone A cells. Cells were plated
on laminin-1 and incubated for 1 h
at 37°C. After permeablization
with a Triton X-100 buffer, the
cells were incubated with either
gelsolin (G) or control buffer (C) for 30 min. The gelsolin-liberated fraction was immunoprecipitated with an
6-specific antibody (2B7), subjected to SDS-PAGE, and immunoblotted with a
4-specific polyclonal antibody. An aliquot of the gelsolin-liberated
fraction was subjected to SDS-PAGE and stained with Coomassie
blue to detect the 43-kD actin band that was evident in the gelsolin-treated but not the control cells.
[View Larger Version of this Image (36K GIF file)]
6
4 Integrin with
Filopodia and Lamellae in Other Carcinoma Cells
6
4 integrin observed in clone
A cells could be extended to other carcinoma cells that express
6
4. The CCL-228 and MIP-101 colon carcinoma
cells have been shown previously to express the
6 integrin subunit exclusively associated with
4 (19), while the
MDA-MB-231 breast carcinoma cells express primarily
the
6
4 heterodimer (data not shown). These carcinoma cells were analyzed by indirect immunofluorescence using
an anti-
4 antibody (A9) and FITC-phalloidin. Although
these carcinoma cells differed markedly in their morphology on laminin-1, all of them exhibited a fine grainy pattern of
4 staining on their ventral surfaces (Fig. 13, A-E).
More specifically,
4 was localized in discrete clusters in
filopodia, retraction fibers, and lamellae. A striking colocalization of
4 and actin was seen in these structures similar to the results obtained with clone A cells. Interestingly, MIP-101 cells exhibited long filopodia with distinct
"actin nodes" that were enriched in
4 staining. (Fig. 13, A
and B).
Fig. 13.
The
6
4 integrin is localized in actin-containing motility structures in other carcinoma cells. MIP-101 (A and B),
MDA-MB-231 (C and D), and CCL-228 (E) carcinoma cells were
analyzed by double immunostaining with the
4-specific A9 antibody (A, C, and E) and FITC-phalloidin (B and D). Note the
concentration of
6
4 in the actin nodes present in the filopodia
of MIP-101 cells (A and B, arrowheads) and the distribution of
6
4 in filopodia, retraction fibers, and lamellae of MDA-MB-231
and CCL-228 cells. (F) An
6-specific antibody inhibits formation of lamellae in CCL-228 cells. Cells were plated on laminin-1
in the presence or absence of 2B7 for 1 h. The cells were photographed, and their lamellar area (µm2/cell) was determined by
digital image analysis. 50 cells were analyzed for each condition.
Error bar represents SEM. Bar, 20 µm.
[View Larger Versions of these Images (91 + 24K GIF file)]
6
4 integrin in
the dynamic behavior of CCL-228 cells on laminin-1 using
the function-blocking 2B7 antibody. As shown in Fig. 13 F,
2B7 markedly inhibited the formation of lamellae, but it
did not affect cell attachment. Similar results were obtained with MIP-101 and MDA-MB-231 cells (data not
shown). These data indicate that the interaction of
6
4
with actin-containing motility structures is a frequent phenomenon in carcinoma cells.
Discussion
6
4 integrin have focused primarily on its role in the organization of hemidesmosomes,
stable adhesive structures that associate with the intermediate filament cytoskeleton (5, 15, 22, 49, 51). We report
here that the
6
4 integrin can also function in the dynamic process of cell migration on laminin-1 based on data
obtained from the analysis of clone A colon carcinoma
and other carcinoma cells. Interestingly, our results demonstrate that this integrin participates in a specific aspect
of the migration process, the formation and stabilization of
filopodia and lamellae. The functional involvement of the
6
4 integrin in the dynamics of these actin-containing
motility structures is supported by our findings that
6
4
is localized in filopodia and edges of the lamellae and that
it associates with actin and not with cytokeratins in these
structures. These specific functions of
6
4 in the migration process of clone A cells are in contrast to a more general function for
1 integrins, which are required for the
adhesion and spreading of clone A cells on laminin-1.
6
4 integrin contributes to carcinoma
progression. Although several studies have linked this integrin to the invasive behavior of various carcinomas,
mechanistic data to support a function for
6
4 in a dynamic process such as invasion have been lacking (43 and
references therein). Our finding that
6
4 can participate in the formation and function of actin-containing motility
structures in colon carcinoma cells clearly suggests an important role for this integrin in cell migration, a process
that is critical for tumor invasion and metastasis. Indeed, it
will be extremely informative to study the localization and
cytoskeletal dynamics of
6
4 in other carcinoma cells in
which it has been linked to invasion, such as thyroid and
gastric carcinomas (45, 52). In this direction, it is worth
mentioning that many aspects of epithelial wound healing, including a loss of cell polarity and an induction of cell migration, resemble the behavior of invasive carcinoma cells
exemplified by the fibroblast-like morphology and active
motility seen in clone A cells (37). There is some evidence
in fact that
6
4 may participate in epithelial wound healing (9, 23, 29, 30, 35, 37), although the nature of this involvement has not been explored. In addition, EGF has
been shown to increase the migration of 804G bladder
cells by disrupting hemidesmosomes and possibly enabling
6
4 to participate in migration (36). Collectively, these
findings raise the possibility of a general function for the
6
4 integrin in epithelial cell migration.
6
4 integrin because function-blocking antibodies substantially reduced the number of stabilized filopodia. Stabilization is probably a direct interaction of
6
4 with
laminin-1 at the anchorage point, based on the observation
that
6
4 is enriched at the angles of filopodia, sites that
are clearly the anchoring points detected by videomicroscopy. This scenario implies that the stabilizing function of
the
6
4 integrin is an early event in clone A motility on
laminin-1.
6
4 integrin in filopodial formation and stabilization is unique. Clearly, many cell types that do not express this integrin can form filopodia and migrate on laminin-1. We propose that the
6
4 integrin enhances the
process of filopodial extension and stabilization because of
its distinctive adhesive properties on laminin-1. Previously, we demonstrated that the
6
4 integrin expressed
by clone A cells has an extremely high adhesive strength for laminin-1 (50). Specifically, laminin-1 adhesion mediated by this integrin was able to resist shear forces up to
100 dynes/cm2. The high adhesive strength of this integrin
for laminin-1 supports its involvement in filopodial stabilization. Moreover, the fact that we observed
6
4 preferentially expressed in retraction fibers at the trailing edge
of migrating cells, as well as in retraction fibers detached
from migrating cells, supports the notion that
6
4 interacts avidly with laminin-1 and that this interaction, once
formed, is not disrupted easily. A mechanism for releasing the adhesive strength of
6
4 at the rear of the cell must
exist, however, because the bulk of this integrin remains
with the migrating cell. Indeed, the dynamics of integrins
at the rear of migrating cells have been linked to the regulation of cell motility (31, 42).
6
4 integrin with actin filaments and that this association
is dependent on the adhesion of these cells to laminin-1.
Specifically, the actin-severing protein gelsolin was able to
liberate
6
4 from clone A cells along with actin. Also,
the immunostaining studies revealed that both filopodia
and the edges of lamellae contain
6
4 distributed in the
form of discrete clusters that colocalized with F-actin.
Filopodia and many of the margins of lamellae did not
contain any cytokeratins detectable by immunofluorescence microscopy using a pan-cytokeratin antibody. An
association between
6
4 and F-actin is also supported by
the fact that
6
4 immunostaining at the marginal edges
of the cell was resistant to solubilization with Triton
X-100. Moreover,
6
4 was extracted from these marginal edges with a Tween-40/deoxycholate buffer that has been
shown to solubilize most of the actin cytoskeleton but not
intermediate filaments (4, 13), providing additional evidence that
6
4 does not associate with cytokeratins in
filopodia and the distal areas of lamellae. However,
6
4
appears to associate with cytokeratins at the base of the
lamellae based on the colocalization data and the fact that
the
6
4 immunostaining in these regions was resistant to
the Tween-40/deoxycholate buffer. These observations
suggest that a more stable
6
4-mediated adhesion may
occur at the base of the lamellae than in filopodia and the
margins of the lamellae.
6
4 integrin and actin filament
bundles is intriguing and it could relate to the mechanism
of clone A migration. A parallel arrangement of actin filament bundles was consistently found in fan-shaped lamellae of cells that moved at a higher rate and that persisted
in one direction for longer times than cells that did not express such bundles. These parallel actin bundles are probably related to those described earlier as actin arcs that are
preferentially seen in very motile cells, in contrast to stress
fibers that organize orthogonally and are frequently seen
in stationary cells (18, 25, 50). These arcs originate on the
ventral margins of the cell and then traverse in parallel
across the dorsal surface of the lamella. The integrin
6
4
appears to have a critical role in the formation of these actin filament bundles because they were disrupted by
6-blocking antibodies. Moreover,
6
4 was associated with
actin at the origins of these actin filament bundles based
on the results obtained with the detergent extraction protocol. Additional studies on the involvement of these actin
bundles in cell migration and the role of
6
4 in their
function should be insightful.
6
4 integrin can participate in filopodial formation on laminin-1 based on the findings that function-blocking antibodies inhibited their formation. Although
the mechanism by which
6
4 contributes to filopodial
growth remains to be elucidated, an area that should be
explored is the involvement of
6
4 in actin dynamics.
One model of filopodial growth suggests that substrate- anchored proteins coupled with molecular motors at the
base of filopodia regulate the rearward flow of actin, while
those at the tip may regulate the polymerization of actin
(47). Based on this model and our finding that
6
4 was
found in clusters at the roots of filopodia in association
with actin, one possibility is that
6
4 functions as a substrate-anchoring molecule that is involved in reducing the
rearward flow of actin at the roots of filopodia. Interestingly, reduction of the rearward flow of actin has been
shown to induce cell protrusions (33). Another likely possibility is that a signaling cascade initiated by ligation of
6
4 is linked to the mechanism of actin polymerization
and filopodial growth. For example, the GTPase cdc42
(28, 40) has been implicated in filopodial formation in fibroblasts, and the possibility that
6
4 regulates the activity of such molecules is attractive.
6
4 and
1 integrins in mediating clone A interactions with laminin-1. Previously, we
demonstrated that clone A cells use the
6
4 and
2
1 integrins to interact with laminin-1 (32, 34). The mAb inhibition data presented here extend these observations by
demonstrating that a
1 integrin, presumably
2
1, is essential for the adhesion and spreading of clone A cells on
laminin-1 but that
6
4 is not required for these processes.
As shown, the
6
4 integrin appears to be involved in a
much more specific function in clone A cells, the formation and stabilization of filopodia and lamellae. Although
it is difficult to assess the role of
1 integrins in these
events directly because function-blocking mAbs cause the
cells to detach from laminin-1, it is likely that they are essential. This possibility is supported by our finding that
both
6
4 and
1 integrins are localized in filopodia and
lamellae. A reasonable hypothesis based on these observations is that the
6
4 and
2
1 integrins mediate distinct signaling pathways in response to their ligation by laminin-1 and that both signaling pathways are required for the migration of clone A cells on laminin-1.
6
4 integrin that
we have characterized in clone A cells should be compared with recent studies on the molecular interactions between
6
4 and cytokeratins (16). There is now evidence
that the hemidesmosomal proteins BPAG-2 (bullous pemphigoid antigen) and HD-1 interact with
6
4 (20, 44),
and that HD-1 can provide the link between
6
4 and cytokeratins (55). Another hemidesmosomal protein, BPAG-1, has been shown to be essential in the attachment of cytokeratins to the hemidesmosome, although an interaction
with
6
4 has not been demonstrated (17). Clone A cells
express HD-1 but they do not express either of the BPAG
proteins (data not shown), and they do not contain classical hemidesmosomes (32). In this regard, however, another type of hemidesmosome (type II), has been described in a mammary epithelial cell line that contains only
6
4 in association with HD-1 (55). Type II hemidesmosomes have also been observed in HT29-Fu cells, a colon
carcinoma cell line that was reverted to a differentiated
phenotype by fluorouracil treatment (14). An important
difference, however, between these cells and clone A cells
is that the distribution pattern of
6
4 in the mammary epithelial and HT29-Fu cells did not suggest an association
with actin (14, 55). Although the molecular basis for these
differences in the cytoskeletal associations of
6
4 are not
known, an invasive carcinoma cell such as clone A may be
an extremely useful cell type to define the molecules that
link
6
4 to the actin cytoskeleton and the factors that
promote this association. In clone A cells, HD-1 is probably not involved in
6
4 linkage with actin because preliminary studies indicate that HD-1 is not present in the
filopodia and edges of the lamellae of these cells (Rabinovitz,
I., unpublished results). Regardless of the mechanism,
however, a shift from a stable interaction of
6
4 with cytokeratins to a more dynamic interaction with the actin cytoskeleton could have important implications for epithelial cell migration and tumor progression.
Received for publication 26 June 1997 and in revised form 25 September 1997.
Address all correspondence to Arthur M. Mercurio, Beth Israel Deaconess Medical Center-Dana 601, 330 Brookline Ave., Boston, MA 02215. Tel.: (617) 667-7714. Fax: (617) 975-5071. E-mail: amercuri{at}bih.harvard.eduWe thank Paul Janmey and Phil Allen for helpful discussions and for providing gelsolin. Margaret Lotz, Leslie Shaw, and Julie Theriot are acknowledged for helpful discussions and comments on the manuscript, and Helen Wang for technical assistance. We also thank Steve Akiyama and Tom Carey for providing antibodies.
This work was supported by National Institutes of Health grants CA44704 and AI39264 and a US Army Breast Cancer Grant.
Since submission of this manuscript, we have shown
that the mechanism by which the
6
4 integrin mediates the formation of lamellae involves activation of phosphoinositide 3-OH kinase (Shaw, L.M., I. Rabinovitz, H. Wang, A. Toker, and A.M. Mercurio. 1997. Cell. In
press).
| 1. |
Akiyama, S.K.,
S.S. Yamada, and
K.M. Yamada.
1986.
Characterization of
a 140-kD avian cell surface antigen as a fibronectin-binding molecule.
J.
Cell Biol.
102:
442-448
|
| 2. |
Albrecht-Buehler, G..
1976.
Filopodia of spreading 3T3 cells. Do they have
a substrate-exploring function?
J. Cell Biol.
69:
275-286
|
| 3. |
Borradori, L., and
A. Sonnenberg.
1996.
Hemidesmosomes roles in adhesion, signaling and human diseases.
Curr. Opin. Cell Biol.
8:
647-656
[Medline].
|
| 4. | Capco, D.G., K.M. Wan, and S. Penman. 1982. The nuclear matrix: three-dimensional architecture and protein composition. Cell 29: 847-858 [Medline]. |
| 5. |
Carter, W.G.,
P. Kaur,
S.G. Gil,
P.J. Gahr, and
E.A. Wayner.
1990.
Distinct
functions for integrins 3 1 in focal adhesions and 6 4/bullous pemphigoid antigen in a new stable anchoring contact (SAC) of keratinocytes: relation to hemidesmosomes.
J. Cell Biol.
111:
3141-3154
|
| 6. |
Chao, C.,
M.M. Lotz,
A.C. Clarke, and
A.M. Mercurio.
1996.
A function
for the integrin 6 4 in the invasive properties of colorectal carcinoma
cells.
Cancer Res.
56:
4811-4819
|
| 7. |
Cramer, L., and
T.J. Mitchison.
1993.
Moving and stationary actin filaments
are involved in spreading of postmitotic PtK2 cells.
J. Cell Biol.
122:
833-843
|